Suback
New Member
- Joined
- Oct 28, 2019
- Messages
- 2
- Location
- Melbourne, Australia
- Car Year
- 2002
- Car Model
- Outback H6
- Transmission
- Auto
83 Leone help identify part
- Thread starter Suback
- Start date
El_Freddo
Forum Member
- Joined
- Aug 11, 2008
- Messages
- 2,399
- Location
- Bridgewater, Vic
- Car Year
- 1988, 1990
- Car Model
- EJ22'd L series; Targa Brumby
- Transmission
- Locking FT4wd 5spd Manual, 4.111:1 diff w 1.59:1 low range & front OBX LSD ;)
That’s an air line to the boot on the other side. The idea is to move air through the line in the pic to the boot that’s extending from the one that’s compressing.
Quite clever. But aftermarket boots don’t have a place to fit this air line so it becomes redundant. I don’t even know if you can get genuine boots to replace the dead ones and use that air line as intended.
Cheers
Bennie
Quite clever. But aftermarket boots don’t have a place to fit this air line so it becomes redundant. I don’t even know if you can get genuine boots to replace the dead ones and use that air line as intended.
Cheers
Bennie
Suback
New Member
- Joined
- Oct 28, 2019
- Messages
- 2
- Location
- Melbourne, Australia
- Car Year
- 2002
- Car Model
- Outback H6
- Transmission
- Auto
@El_Freddo,
I thought it might have been. Yeh hard to get oem boots now but found the ‘Stretch’ universal rack boot with a breather that may work.
I thought it might have been. Yeh hard to get oem boots now but found the ‘Stretch’ universal rack boot with a breather that may work.
Last edited by a moderator: