my foz is normally a road hugger - 17" alloys and sitting on coil overs.
it is about to be lifted back up and new wheels and offroad rubber installed for a bit more dirty fun and camping.
this was the 1st lifting of my foz a few years ago.
was lifted pedders springs on custom struts - we cut the spring seats loose and then rewelded them about 2" higher on the strut body.
the 2nd pic has neither front of rear sway bar attached.
the foz is slightly modded in the go fast and handling areas at the moment, the power will stay but the suspension is in the midst of an offroad over haul. nothing to extreme but will make it more fun in the dirt.
the go fast bits are :
VF28 turbo
apexi power fc
apexi avcr
sti tmic
silicon
3" exhaust
cusco LSD
and other stuff
the stop bits are :
4 pots up front
2 pots in the rear
braided brake lines
the handleing bits are :
'07 XT struts and springs (about to go in)
sti front control arms
H brace
diff braces and mount locks
rear strut brace and custom X brace
theres plenty of other small bits and peices as well
so thats where its at and this is whats going on it once the new strut setup is in
thats the story so far
more'll be updated once its hitting the dirt more and i'll definitely get some pics up
cheers
it is about to be lifted back up and new wheels and offroad rubber installed for a bit more dirty fun and camping.
this was the 1st lifting of my foz a few years ago.
was lifted pedders springs on custom struts - we cut the spring seats loose and then rewelded them about 2" higher on the strut body.
the 2nd pic has neither front of rear sway bar attached.
the foz is slightly modded in the go fast and handling areas at the moment, the power will stay but the suspension is in the midst of an offroad over haul. nothing to extreme but will make it more fun in the dirt.
the go fast bits are :
VF28 turbo
apexi power fc
apexi avcr
sti tmic
silicon
3" exhaust
cusco LSD
and other stuff
the stop bits are :
4 pots up front
2 pots in the rear
braided brake lines
the handleing bits are :
'07 XT struts and springs (about to go in)
sti front control arms
H brace
diff braces and mount locks
rear strut brace and custom X brace
theres plenty of other small bits and peices as well
so thats where its at and this is whats going on it once the new strut setup is in
thats the story so far
more'll be updated once its hitting the dirt more and i'll definitely get some pics up
cheers