Possible lift?

thatguy

thatguy

Forum Member
Joined
Jul 15, 2008
Messages
43
Location
Surfside Beach,SC
Since the US lacks all the great subaru accessories available in Australia I've been searching for options here and just ran across these.
https://store.bigboikits.com/mercha...Code=BOS&Product_Code=CUPS2&Category_Code=ULK
Even though they aren't made for a subaru is this something that could work? The spring diameter is the only thing I could see be different between a big chevy and a subaru but I don't know.
 
You still need to increase the subframe spacers, otherwise there is too much stress on the driveline, and wheel alignment becomes tough.

YOu can go with the longer springs that are sold down under like some do, or go with a lift kit like i did.

What year you looking at lifting?


nipper
 
03 NA XS, but if I went with a 2 in spring spacer wouldn't it be the same as a 2 in strut spacer in terms of subframe spacers and stress on the driveline?
 
Are you adding extra lift to a forester?

The soobies are lifted with spacers all around at the struts and the subframe from the factory. I added 2 " to mine by replacing all the factory spacers with four inch spacers, and had to use camber bolts to make the alignment work. And that was a close call.
 
You must log in or register to reply here.
Back
Top