custom light bar

mav

Forum Member
Joined
Apr 8, 2009
Messages
78
Location
newcastle, australia
ive finally got started on making my custom light bar, ive been tryin to start some of it at work wen thers a bit of spare time but weve been workin flat out, i finally got sum time on fridy arvo, heres what ive made so far..

this was the first prototype just to see if it worked.
Photo0259.jpg


this was my bending jig that a made up out of an old bearing, worked a treat.
Photo0260.jpg


Photo0261.jpg


Photo0262.jpg


this is what it turned out like, ive still got a fair bit to make, this is just two parts out of a few. the right hand side vertical bit is the part that will connect to a bar just in front of the radiator, and the left hand side sort of like wraps from between the bumper up to the grill, ill take sum more fotos later what it looks like on the car :ebiggrin: there is two parts here in foto.
Photo0263.jpg
 
edit.jpg


the long blue strip is a bit of flat bar that goes between two holes, and the holes indicated is where im bolting onto, the holes for the light bar are 330mm apart
 
Back
Top