SG5 - Koni insert shocks help
- Thread starter SuberSTi
- Start date
Kevin
Administrator
- Joined
- Jul 28, 2008
- Messages
- 7,148
- Location
- Sydney, Oz
- Car Year
- MY'03
- Car Model
- Forester
- Transmission
- A/T
I have Koni inserts - but it's not a simple job. The struts are from a '99 Legacy / Liberty I believe (thicker body) and then they have been modified (strengthened, spring perches moved and I'm not sure what else). I'll dig the invoices out and check.
Kevin
Administrator
- Joined
- Jul 28, 2008
- Messages
- 7,148
- Location
- Sydney, Oz
- Car Year
- MY'03
- Car Model
- Forester
- Transmission
- A/T
Sorry for the delay, I've been grappling with year-end.
Found the invoice. Originally Liberty / Legacy Konis were installed; parts are K8610-1266SPT and K8610-1267SPT (the field display on the invoice runs into the next field so there may be more codes).
However, after some issues with the front they did a swap to Koni's for a "VR Holden Commodore" for the V8 model (I was told - but not documented.) The VR was a 1993-1995 GM local model.
Hope this helps.
Found the invoice. Originally Liberty / Legacy Konis were installed; parts are K8610-1266SPT and K8610-1267SPT (the field display on the invoice runs into the next field so there may be more codes).
However, after some issues with the front they did a swap to Koni's for a "VR Holden Commodore" for the V8 model (I was told - but not documented.) The VR was a 1993-1995 GM local model.
Hope this helps.