• Upgrade to XenForo 2.2.15 has completed

Need to find a bullbar

Brownie

Forum Member
Joined
May 28, 2018
Messages
12
Location
NSW
Car Year
2005
Car Model
Forester
Transmission
Manual
Having trouble finding a second hand bullbar in NSW for my 2005 MY06 forester. I was wondering if anyone had some experience (or bullbars) to impart

I've also been looking into getting a bullbar not meant for the forester and modifying it to fit
 
Last edited:
Your bio says 2005 Forester and your post says 2006.
 
Sorry for the confusion, it's a post july 2005 MY06 model making it a 3rd gen I think
 
We usually put MY in the profile; mine was manufactured and purchased in 2002 and is an MY'03.
 
Sorry for the confusion, it's a post july 2005 MY06 model making it a 3rd gen I think


commonly called a SG series II, I believe because mechanically they're virtually the same (Although a difference in the the engine?).
 
Yes, different engine for the na and a different output for the turbo.
 
Does anyone here know of anyone who has gotten a bullbar from another vehicle and retrofit it to sit on an SGII forester? I found 1 video of a guy mounting a bullbar from a D22 navara onto his SF
 
"Someone" did this recently but I'm having trouble finding the thread and not sure which forum; it may have been the one you mention above.
 
You can fit a 100 Series bar on one in the same way you can fit any bullbar on any car - custom fabricated mounts. I'm not sure if there's a specific write up on it. If you're good at metal work anythings possible, just find a similar sized bar. If you're paying for fab work you will be getting close to new Irvin/Subaxtreme costs anyway, which would be more legal.

17759699_10154782518588882_8201303405626073576_n.jpg

https://www.facebook.com/photo.php?fbid=10154782518588882&set=gm.630549467155851&type=3&theater
 
Back
Top