![]() | ![]() |
#21
|
||||
|
||||
![]()
anyone..........i cant drop the diff..
__________________
01 foz-2" lift-BFG-snorkel-raised kings-FOR SALE |
#22
|
||||
|
||||
![]() Quote:
If you can't get hold of one of these, try putting 2x nuts on the bolt ![]() Then by turning the 1st nut only (inside one) you should be able to undo the bolt that way ![]() ![]() Hope this helps. Regards Mr Turbo
__________________
We go anywhere & everywhere together as nothing's too hard in a Forry Some call it Man V's Wild ![]() ![]() |
#23
|
||||
|
||||
![]()
thanks. just to be clear i have to force or the studs to drop the diff then to get it back in a have to force the studs back in with a hammer or something?
jason
__________________
01 foz-2" lift-BFG-snorkel-raised kings-FOR SALE Last edited by jason tincey; 13th June 2009 at 06:58 AM. |
#24
|
||||
|
||||
![]()
look the eaisest sollution is to just pop on over to Sydney and have Damo do it for you.
![]()
__________________
cheers, Eden ![]() 2000 outback, subX bullbar + sumpguard,50mm raised strut blocks,30mm raised springs,215/65/16 rubber,uhf, dual battery system,150W spots,touchscreen navigation with oziexplorer. more to come ![]() |
#25
|
||||
|
||||
![]()
Nice drive this time of year- you can do it in a week without pushing, although I have heard of it being done in under 30 hours with 2 drivers pretty much non stop
|
#26
|
||||
|
||||
![]() Quote:
![]() It would have to be an overnighter though, as it might be a little too far for a day trip. ![]() Regards Mr Turbo
__________________
We go anywhere & everywhere together as nothing's too hard in a Forry Some call it Man V's Wild ![]() ![]() |
#27
|
||||
|
||||
![]() Quote:
Unscrew it using the 2 nuts per Damian's post. Then screw it back in when you're done
__________________
MY'03 Foz AT XS with centre lock-up MY'10 Triton AT GLX-R 2.5 DiD www.subaruclub.com.au |
#28
|
||||
|
||||
![]()
hahaha ok thanks, dont think ill be driving to syden dont have the fuel money
__________________
01 foz-2" lift-BFG-snorkel-raised kings-FOR SALE |
#29
|
||||
|
||||
![]()
I should have mentioned this earlier too.
When putting the bolts back in, you may want to use a jack to lift the diff & hold it in place. Not that it's needed, but it does make it a lot easier, especially if you're doing it by yourself. ![]() Regards Mr Turbo
__________________
We go anywhere & everywhere together as nothing's too hard in a Forry Some call it Man V's Wild ![]() ![]() |
#30
|
||||
|
||||
![]()
thanks guys did it thismorning it tokk me about 30 mins max (had to wait for silicon todry which was the longest part hahah. yer used a jack to like the diff back up.
thanks for all your help jason
__________________
01 foz-2" lift-BFG-snorkel-raised kings-FOR SALE |
![]() |
Tags |
diff breather, differentials |
Thread Tools | |
|
|