OFFROADSUBARUS.com

Go Back   OFFROADSUBARUS.com > Technical Forums > Under the Bonnet/Hood

Notices

User Tag List

Reply
 
Thread Tools
  #1  
Old 8th January 2018, 09:59 PM
Dulagarl's Avatar
Dulagarl Dulagarl is offline
Senior Member
 
Join Date: Aug 2010
Location: Canberra ACT
Year: 2000
Model: EZ30R Forester
Transmission: Dual range manual
Posts: 932
Dulagarl is on a distinguished road
Default Oxygen sensor ultrasonic cleaning: it does work

I recently had an exhaust leak which gunked up my oxygen sensors. The right one in particular was very sluggish, alternating between maximum (0.89 v) and minimum (0 v) values and not much in between. This causes the sensors to compete against each other, resulting in surging at idle. (One sensor cause the engine to run lean and the other to run rich.)

I saw a vid on youtube which showed the use of an ultrasonic cleaner to clean oxygen sensors. I was sceptical, but thought that spending around $70 for an ultrasonic cleaner at Jaycar, before spending a stack on new sensors, was worth a try.

To my surprise it worked: very well.

Both sensors are now dithering in the mid range around 0.4 to 0.6 v most of the time. Engine is running smoother, economy is back where it should be, and there is no surging at idle. The sensors are basically doing exactly the same thing at the same time, although the right lags a little behind the left, and is probably on the way out. (that being said the sensors are not identical, and one is older than the other.)

It won't work on stuffed sensors, but dirty ones? it seems to.

It makes me think that a lot of sensors get replaced before they are actually stuffed.

For what its worth, I used de-mineralised water with a small amount of detergent for 90 secodns, then a fresh batch of de-mineralised water for a further 90 seconds, for each sensor. I let them dry thoroughly before re-installation.

here's the video that sent me in this direction.

https://www.youtube.com/watch?v=tD9KXAukO9M


FYI the vehicle is EZ30R Forester, ECU is vipec, and sensor performance (before and after) was monitored on the VIPEC software.
Reply With Quote
  #2  
Old 9th January 2018, 02:10 AM
Ratbag's Avatar
Ratbag Ratbag is offline
Administrator
 
Join Date: Jan 2012
Location: Bayside, Melbourne, Vic
Year: MY06, MY10
Model: Forester SG & SH
Transmission: 5MT/DR & 4EAT Sports
Posts: 6,194
Ratbag is on a distinguished road
Default

Very interesting info, Greg. Good to have this first hand experience.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -3. The time now is 05:00 AM.


Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.